Shipped ready to install, you can customize your building and significantly reduce build time with our durable, weathertight roof and wall panels.
Kodiak Metl-Span panels are also virtually 100% recyclable – no steel or material waste occurs before or after manufacturing, or during construction.
Learn more about our building capabilities
Exposed Fastening Panels
Exposed fastening wall panels offer unparalleled design flexibility and a cost-efficient, architecturally attractive metal panel solution.
AVP Wall Panel
The AVP panel produces a decorative shadow line creating a distinctive architectural effect with semi-concealed fasteners.
Ribs are 1 1/8″ deep and major corrugations spaced 12″ on center. The net coverage of panel is 3′-0 “.
- Gauge26G (standard), 24G
- FinishGalvalume Plus, Signature 200/300
- LengthMax 40' - 0"
- Dimensions36″ wide x 1 1/8” deep
- FastenersVarious
- UsageWall Panel, Liner, Soffit, Mansard, Back Sheet
PBR Panel
The PBR panel’s deep ribs create an even-shadowed appearance. The area between the major ribs is reinforced with minor ribs.
PBR is one of the most economical panel systems and can be used for both roof and wall applications.
- Gauge26G (standard), 24G, 22G
- FinishGalvalume Plus, Signature 200/300
- LengthMax Length 45' - Longer Available
- Dimensions36″ wide x 1 1/4”
- FastenersStandard Coated, Cast Head, Stainless Steel Head Screw
- UsageRoof, Wall, Liner, Mansard, Soffit Panel
PBU Panel
The PBU panel is an exposed fastener system that can be used for both roof and wall applications. PBU can be installed directly over purlins or joists.
PBU offers the versatility of being used in both vertical and horizontal applications to give designers a contemporary appearance for their building project.
- Gauge26G (standard), 29G, 24G, 22G
- FinishGalvalume Plus, Signature 200/300
- LengthMax 40' - standard *other lengths available
- Dimensions36″ coverage x 3/4” deep
- LimitationsRecommended for roof slopes of 1/2:12 +
Retro-R Panel
The Retro-R® Panel is an excellent choice for retrofit construction. Retro-R® can be applied directly over an existing PBR or R Panel roof to give your building a new look and longer life. Retro-R® is an exposed fastener system.
- Gauge29G (standard)
- FinishGalvalume Plus, Signature 200/300
- Dimensions36″ wide and 1-1/16″ Rib Height
- LimitationsRecommended for roof slopes of ½:12.
- UsageRetrofit Construction
Rain Guard Panel
Rain-Guard® is an excellent water shedding panel. Rain-Guard® is a roof and wall panel ideal for residential, light commercial, agricultural, canopies and storage building use.
- Gauge29G (standard), 26G
- FinishGalvalume Plus, Signature 200
- LengthMax Length 45' - longer lengths available
- Dimensions36" wide, 6" on center rib spacing, 15/32" rib height
- UsageRecommended for roof slopes of 3:12
- UsageMust be installed over a solid, waterproofed deck if used as a roof panel
Concealed Fastening Panels
Our concealed fastening wall panels offer an aesthetically pleasing, smooth appearance while providing lifetime protection from even the most extreme weather.
Designer Series - Flat
The Designer™ Series panels provide the durability of steel while creating an attractive, flexible and functional wall or fascia panel.
- Gauge24G (standard), 22G
- FinishGalvalume Plus, Signature 200/300, Smooth/Embossed
- LengthMax 40' - 0"
- Dimensions12″ wide x 1 ¾” high
- FastenersConcealed Fastening
Designer Series - Fluted
The Designer™ Series 16.0 Fluted Panel offers a continuous rib design with a hidden side lap where the panels join together.
- Gauge24G (standard), 22G
- FinishGalvalume Plus, Signature 200/300, Smooth/Embossed
- Dimensions16″ wide X 1 ¾” high
- FastenersConcealed Fastening
FW-120 Panel
The FW-120 panel is a concealed fastener wall and liner panel that provides a flat appearance. The heavy gauge offering provides for large spanning capabilities, particularly in composite wall applications.
Air Infiltration and Water Penetration
The FW-120 Panel has been tested by a certified independent laboratory in accordance with ASTM test procedures for Air Infiltration and Water Penetration at the sidelap. Test results show no air leakage at 1.57PSF and no water penetration at 6.24PSF differential pressure.
- Gauge24G (standard), 22G, 20G
- FinishSignature 200, Signature 300
- LengthMax 40' - 0"
- Dimensions12″ wide
Nu-Wall Panel
This concealed fastened system creates a clean, uninterrupted wall on a building. The NuWall® system is based on a 12-inch module (when using NuWall® over existing metal panels, the existing panel ribs must be 6 inches or 12 inches on center).
- Gauge24G (standard), 22G
- FinishGalvalume Plus, Signature 200/300, Smooth/Embossed
- LengthMax 40' - 0"
- Dimensions12″ wide by 2 ½” high
- UsageRetrofit Construction - 2" Insulation between new and existing panels
ShadowRib Panel
ShadowRib™ panel combines aesthetics, economics and function to bring definition to metal structures.
This panel is a proven performer and a versatile tool, its structural strength is accomplished without sacrificing appearance or design flexibility.
- Gauge24G (standard), 22G
- FinishGalvalume Plus, Signature 200/300
- LengthMax 40' - 0"
- Dimensions16″ wide x 3” high
- FastenersConcealed Fastening
- UsageWalls, fascias, equipment screens
Ready to start customizing your Kodiak?
Metal Roof Panels
As with with our wall panels, we offer a wide range of roof panel options to outfit your new Kodiak building.
Already have a building? Choose from our selection of roof panels to retrofit an existing roof.
Standing Seam Roof Panels
Kodiak’s standing seam panels are the most durable and weathertight roof systems available in the industry.
We offer two types of standing seam metal roof systems: vertical leg structural standing seam and trapezoidal structural standing seam.
Curved Roof Panels
We offer three different metal panel styles that provide a curved roof or fascia to your design, and can be installed over solid deck or open framing.
Concealed Fastening Roof Panels
Concealed fastening roof panels offer excellent weather resistance and superior durability.
Narrower than exposed fastener panels, these can be applied over conventional or wood-framed structures.
Exposed Fastening Roof Panels
We offer multiple exposed fastening roof panels that are economical and provide a versatile, durable, and dependable roof.
Insulated Metal Panels (IMPs)
Insulated metal panels (IMPs) offer many advantages including; improved thermal performance and reduced operational expenses, and are best suited for cold storage, commercial, and industrial buildings.
Add IMPs for retrofit renovations to upgrade appearance and add insulation value to existing structures, while benefitting LEED certification.
Insulated Wall Panels
IMP panels offer the look of a conventional flat wall panel with the advantages of IMPs, including insulating capabilities, longevity, and exceptional span capacity.
Available in multiple colors and finishes.
Insulated Roof Panels
Superior Insulating Value across the entire wall and roof area is assured. The advanced polyurethane core provides enhanced insulation values that significantly lowers heating and cooling costs.
One-Piece Construction process assures rapid completion of the wall and roof system. Factory fabricated composite panels are attached directly to the supporting structure and multiple steps to construct the insulated wall and roof are eliminated. Faster building completion means reduced construction and interim financing costs.
Lightweight yet Structurally Strong panels weigh only 2 ½ to 3 ½ pounds per square foot, but are structurally strong enough for long spans that can significantly reduce costs for frame support.